Drum filters with biological part | Biodrum drumfilters moving bed
MPF BIODRUM FILTER
Our Biodrum filters are equipped with an ingenious drum filter technique, and a moving bed system for optimal water movement and filtration. These filters combine a drum and moving bed filter in a compact housing.
The polluted pond water first flows into the collecting chamber. The second chamber houses a drum filter and provides mechanical filtration. An air dish/brick is installed at the bottom of the third chamber and must be connected to an external air pump. This causes movement in the third chamber. This chamber will have to be filled up to a maximum of 70% of the content with moving bed material (eg Helix). After a few weeks, bacteria will start to settle on this moving bed of material to filter the water in a biological way. Because the material is constantly in motion, no dirt will accumulate, the material remains clean and requires no maintenance!
An internal flushing pump is included with the MPF Biodrum 50, 80, 100, 120, 100XL, 120, Rotator filters and the Drum 200 as standard. The MPF drum filters (Drum 30/50/100) come with an external flushing pump from Oase with a 3-year warranty. There is the option to have an internal flushing pump built into the Drum 50 and 100.
What is the best setup for my filter?
We always recommend setting up the filter in gravity. The filter is placed at water level and will then protrude approximately 11-14 cm above the water level. Due to the effect of gravity, your filter fills up with water. A pond pump moves the water from your filter back to the pond.
What is the capacity of a pump fed filter system?
If a pump-fed system is chosen, there are a number of things to consider. First, pump fed systems have less capacity. Take a loss of 30% into account. For example, a Biodrum 100 can handle a maximum of 50m3 per hour in gravity setup, and a pump-fed system a maximum of 35m3. The biochamber will also not be completely filled with water, so less biological material will be able to enter. Our advice is to always go for a gravity system.
If a difference is measured, the electronics will activate the flushing. During this flushing, the drive motor turns the drum filter and a high pressure pump from the nozzles (the mouthpiece) sprays the screen. The nozzles spray the water in from the outside of the drum to remove the dirt. This dirty water is collected on the inside of the drum filter by means of a gutter through which the water flows to the sewer. Once the water level is back at the correct level, the drum filter will flush for 20 seconds to ensure proper cleaning. After this, the pressure pump and drive motor will switch off and the electronics will continue its measurement until the next flush.
Our controls
Through years of testing and innovation, we have developed 2 types of controllers for our filters. The simple MPF controller electronics and the MPF Professsional Drum control with Siemens logo control.
MPF CONTROLLER
Standard supplied with each filter.
- The pond pump stops when the water level is too low and turns on again when the water level in the pond is raised again.
- Industrial electronics cabinet in a compact housing
- Provides automatic flushing
- Industrial Relay 16A
- Manual flushing by push button
- Digital display
Option:
MPF Professional Control with siemens logo controller.
This electronics with Siemens Logo 8 controller is a new generation logic module suitable for any customer requirement and is extremely reliable. So reliable that even the large water treatment plants work with Siemens! (surcharge €350,00)
The pond pump stops when the water level is too low and turns on again when the water level in the pond is raised again
- Provides automatic flushing
- You can read the data via internet
- Via an app you can control the Siemens Logo8
- Change flushes yourself if you want longer or shorter flushes
- A daily counter is integrated so you can read out the total number of flushes and daily flushes
- A signal is given when the drum has been in the dry run protection mode
- Possibility to flush your gutter by connecting an additional flushing pump
- Many possibilities to expand the drum to your liking
- 1 x per hour rinsing to prevent the fabric from drying out (winter mode)
Drum UV connections
Each MPF filter is equipped with one or two Drum UV inputs. This makes it easy to install an MPF Drum UV using a rubber coupling.
This filter has a capacity to pump 15m3 per hour, and is suitable for koi ponds up to 20m3!
This filter has a capacit...
Buying a drum filter? The Ilex Biodrum 20 filter : Everything your pond needs!
Buying a drum filter? The...
- OUR DEALERS
- Do you also want to become a dealer? Then click here.
- Own service team
The Ilex Biodrum 25 is a low-maintenance COMBI filter system that ensures healthy and clear pond water with low maintena...
The Ilex Biodrum 25 is a ...
Buying a drum filter? The Ilex Biodrum 20 XL filter : Everything your pond needs! Happy pond fun trommelfilter.
Buying a drum filter? The...
The biodrum 30 filter: Everything your pond needs!
The Makoi Biodrum 30 has the capacity to pump 30m3 per hour, and i...
The biodrum 30 filter: Ev...
The MPF Biodrum 40 Has the capacity to pump 30 m3 per hour. It is suitable for koi ponds up to 40 m3 and swimming ponds ...
The MPF Biodrum 40 Has th...
The Makoi BioDrum 50 small has a capacity to pump 25m3 per hour, and is suitable for koi ponds up to 30m3 and swimming p...
The Makoi BioDrum 50 smal...
This combi filter combines a small housing with the best biological capacity!
This combi filter combine...
The Ilex Biodrum 35 is a low-maintenance COMBI filter system that ensures healthy and clear pond water!
The Ilex Biodrum 35 is a ...
The MPF Biodrum 40 with mat chamber incl. Japanese mats!
The MPF Biodrum 40 with m...
The Makoi BioDrum 50 has the capacity to pump 30m3 per hour, and is suitable for koi ponds up to 50m3 and swimming ponds...
The Makoi BioDrum 50 has ...
The MPF biodrum 80 has the capacity to pump 80 m3 per hour. which makes this filter perfect for koi ponds up to 160 m3 a...
The MPF biodrum 80 has th...
The BioDrum 50+matting chamber has a capacity to pump 30m3 per hour, and is suitable for koi ponds up to 50m3!
The BioDrum 50+matting ch...
The Biodrum 100 is Suitable for koi ponds up to 100m3 and swimming ponds up to 250m3!
The Biodrum 100 is Suitab...
the MPF biodrum 80M has a capacity to pump 50 m3. This makes this filter suitable for koi ponds up to 80 m3 and swimming...
the MPF biodrum 80M has a...
A combination of a drum filter as a pre-filter with a trickle/trickle filter behind it that can be set up in gravity.
A combination of a drum f...
The Biodrum 100 is Suitable for koi ponds up to 100m3 and swimming ponds up to 250m3!
The Biodrum 100 is Suitab...
The Makoi Biodrum100 filter: Everything your pond needs! The Makoi BioDrum 100 has a capacity to pump 50m3 per hour, and...
The Makoi Biodrum100 filt...
The MPF Biodrum 120 filter: 120m3 filter in 1 module!
The MPF Biodrum 120 filte...
The Biodrum Gravity Trickle is the newest innovation in the pond market. The Biodrum Gravity Trickle is a fusion of a dr...
The Biodrum Gravity Trick...
Suitable for koi ponds up to 200m3 and for swimming ponds up to 300m3!
Suitable for koi ponds up...
The MPF biodrum 100XXL has a capacity to pum80 m3 per hour. It is designed for koi ponds up to 160m3 and swimming ponds ...
The MPF biodrum 100XXL ha...
Overige categorieën in Biodrum combi drumfilters
Drum filters with biological part | Biodrum drumfilters moving bed
MPF BIODRUM FILTER
Our Biodrum filters are equipped with an ingenious drum filter technique, and a moving bed system for optimal water movement and filtration. These filters combine a drum and moving bed filter in a compact housing.
The polluted pond water first flows into the collecting chamber. The second chamber houses a drum filter and provides mechanical filtration. An air dish/brick is installed at the bottom of the third chamber and must be connected to an external air pump. This causes movement in the third chamber. This chamber will have to be filled up to a maximum of 70% of the content with moving bed material (eg Helix). After a few weeks, bacteria will start to settle on this moving bed of material to filter the water in a biological way. Because the material is constantly in motion, no dirt will accumulate, the material remains clean and requires no maintenance!
An internal flushing pump is included with the MPF Biodrum 50, 80, 100, 120, 100XL, 120, Rotator filters and the Drum 200 as standard. The MPF drum filters (Drum 30/50/100) come with an external flushing pump from Oase with a 3-year warranty. There is the option to have an internal flushing pump built into the Drum 50 and 100.
What is the best setup for my filter?
We always recommend setting up the filter in gravity. The filter is placed at water level and will then protrude approximately 11-14 cm above the water level. Due to the effect of gravity, your filter fills up with water. A pond pump moves the water from your filter back to the pond.
What is the capacity of a pump fed filter system?
If a pump-fed system is chosen, there are a number of things to consider. First, pump fed systems have less capacity. Take a loss of 30% into account. For example, a Biodrum 100 can handle a maximum of 50m3 per hour in gravity setup, and a pump-fed system a maximum of 35m3. The biochamber will also not be completely filled with water, so less biological material will be able to enter. Our advice is to always go for a gravity system.
If a difference is measured, the electronics will activate the flushing. During this flushing, the drive motor turns the drum filter and a high pressure pump from the nozzles (the mouthpiece) sprays the screen. The nozzles spray the water in from the outside of the drum to remove the dirt. This dirty water is collected on the inside of the drum filter by means of a gutter through which the water flows to the sewer. Once the water level is back at the correct level, the drum filter will flush for 20 seconds to ensure proper cleaning. After this, the pressure pump and drive motor will switch off and the electronics will continue its measurement until the next flush.
Our controls
Through years of testing and innovation, we have developed 2 types of controllers for our filters. The simple MPF controller electronics and the MPF Professsional Drum control with Siemens logo control.
MPF CONTROLLER
Standard supplied with each filter.
- The pond pump stops when the water level is too low and turns on again when the water level in the pond is raised again.
- Industrial electronics cabinet in a compact housing
- Provides automatic flushing
- Industrial Relay 16A
- Manual flushing by push button
- Digital display
Option:
MPF Professional Control with siemens logo controller.
This electronics with Siemens Logo 8 controller is a new generation logic module suitable for any customer requirement and is extremely reliable. So reliable that even the large water treatment plants work with Siemens! (surcharge €350,00)
The pond pump stops when the water level is too low and turns on again when the water level in the pond is raised again
- Provides automatic flushing
- You can read the data via internet
- Via an app you can control the Siemens Logo8
- Change flushes yourself if you want longer or shorter flushes
- A daily counter is integrated so you can read out the total number of flushes and daily flushes
- A signal is given when the drum has been in the dry run protection mode
- Possibility to flush your gutter by connecting an additional flushing pump
- Many possibilities to expand the drum to your liking
- 1 x per hour rinsing to prevent the fabric from drying out (winter mode)
Drum UV connections
Each MPF filter is equipped with one or two Drum UV inputs. This makes it easy to install an MPF Drum UV using a rubber coupling.